MAX9142ESA+T, Аналоговый компаратор, вход с полным размахом напряжения, Высокоскоростной, 2 Компаратора, 40 нс
The MAX9142ESA+T is a low power, rail to rail, dual high speed comparator in 8 pin NSOIC package. This single supply comparator is optimized for systems powered from 3V or 5V supply. It combines high speed, low power and rail to rail inputs. The input common mode range of the device extends beyond both power supply rails. The output pulls to within 0.3V of either supply rail without external pull-up circuitry making this device ideal for interface with both CMOS and TTL logic. All input and output pins can tolerate a continuous short circuit fault condition to either rail. Internal hysteresis ensures clean output switching even with slow moving input signals. The MAX9142 is higher speed, lower power and lower cost upgrades to industry standard MAX941/MAX942/MAX944 comparators. It is used in line receivers, battery powered systems, threshold detectors/discriminators, 3V/5V systems, zero crossing detectors and sampling circuits.
• Supply voltage range is 2.7V to 5.5V
• Operating temperature range from -40°C to 85°C
• Fast propagation delay of 40ns (10mV overdrive)
• 150µA supply current per comparator (VCM = VCC = 3V)
• Outputs swing of 300mV of power rails
• Input offset voltage of 0.5mV at TA = +25°C and input offset current of 8nA at TA = -40°C to +85°C
• CMRR of 80µV/V at VCC = 5.5V and PSRR of 800µV/V at 2.7V <,= VCC <,= 5.5V (TA = -40°C to +85°C)
Полупроводники - Микросхемы\Усилители и Компараторы\Компараторы
Технические параметры
Минимальная Рабочая Температура | -40 C |
Максимальная Рабочая Температура | 85 C |
Время Реакции | 40нс |
Количество Выводов | 8вывод(-ов) |
Тип Выхода Микросхемы | Двухконтактный |
Диапазон Напряжения Питания | 2.7В до 5.5В |
Тип Компаратора | высокоскоростной |
Количество Компараторов | 2 Компаратора |
Стиль Корпуса Компаратора | NSOIC |
Maximum Operating Temperature | +85 C |
Number of Channels per Chip | 2 |
Typical PSRR | 80V/V |
Length | 5mm |
Brand | Maxim |
Power Supply Type | Dual |
Package Type | SOIC |
Mounting Type | Surface Mount |
Minimum Operating Temperature | -40 C |
Width | 4mm |
Comparator Type | Low Power |
Height | 4mm |
Output Type | Push-Pull |
Pin Count | 8 |
Dimensions | 5 x 4 x 1.5mm |
Typical CMRR | 80V/V |
Typical Dual Supply Voltage | 5.5V |
Вес, г | 0.09 |
Задать вопрос
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.