LED1202QTR, LED Driver, 12 Outputs, 2.6V to 5V in, 5V/240mA out, QFN-20
The LED1202 is a 12-channel low quiescent current LED driver, it guarantees 5 V output driving capability and each channel is able to provide up to 20 mA with a headroom voltage of 350 mV (typ.) only. The output current can be adjusted separately for each channel by 8-bit analog and 12-bit digital dimming control. A slow turn-on and turn-off time improves the system low noise generation performance, moreover, the phase shifting function helps to reduce the inrush current. Eight patterns can be stored in the internal registers for automatic sequencing without MCU intervention.
• Supply range from 2.6 V to 5 V
• 12 channels for single LED
• 20 mA current capability per channel
• 1% (typ.) current matching at 16 mA and 2% (typ.) at 2.5 mA
• 1.8 V compatible I?C control interface
• 8-bit analog dimming individual control
• 12-bit local PWM resolution
• 8 programmable patterns
• Programmable pattern sequence
• Synchronization for multi-device application
• Phase shifting between channels
• Open LED detection
• Overtemperature protection
• 8 configurable I2C slave addresses plus global address
• Fault flag pin
Компоненты Светодиодного Освещения\Микросхемы Драйверов Светодиодов\Микросхемы Драйверов DC / DC Светодиодов
Технические параметры
Минимальная Рабочая Температура | -40 C |
Максимальная Рабочая Температура | 85 C |
Максимальное Выходное Напряжение | 5в |
Количество Выводов | 20вывод(-ов) |
Максимальный Выходной Ток | 240мА |
Количество Выходов | 12выход(-ов) |
Минимальное Входное Напряжение | 2.6В |
Максимальное Входное Напряжение | 5в |
Стиль Корпуса Привода | QFN |
Монтаж Микросхемы | SMD (Поверхностный Монтаж) |
Вес, г | 0.023 |
Задать вопрос
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.