LM25085MY/NOPB, PFET контроллер, постоянное время включения, 4.5В до 42В, 1 выход, понижающий, 1МГц, MSOP-8
The LM25085MY/NOPB is a high efficiency PFET Switching Regulator Controller can be used to quickly and easily develop a small, efficient buck regulator for a wide range of applications. This high voltage controller contains a PFET gate driver and a high voltage bias regulator which operates over a wide 4.5 to 42V input range. The constant on-time regulation principle requires no loop compensation, simplifies circuit implementation and results in ultra-fast load transient response. The operating frequency remains nearly constant with line and load variations due to the inverse relationship between the input voltage and the on-time. The PFET architecture allows 100% duty cycle operation for a low dropout voltage. Either the RDS(ON) of the PFET or an external sense resistor can be used to sense current for over-current detection.
• Adjustable current limit using RDS(ON) or a current sense resistor
• No loop compensation required
• Ultra-fast transient response
• Nearly constant operating frequency with line and load variations
• Precision ±2% Feedback reference
• Internal soft-start timer
• Integrated high voltage bias regulator
• Thermal shutdown
• Green product and no Sb/Br
Полупроводники - Микросхемы\Микросхемы Управления Питанием\DC - DC Устройства Управления Питанием
Технические параметры
Минимальная Рабочая Температура | -40 C |
Максимальная Рабочая Температура | 125 C |
Максимальное Напряжение Питания | 42в |
Минимальное Напряжение Питания | 4.5В |
Количество Выводов | 8вывод(-ов) |
Частота Коммутации | 1МГц |
Количество Выходов | 1 Выход |
Топология (Общая Схема Соединений) | Понижающий (Понижающий) |
Стиль Корпуса ИС Контроллера | MSOP |
Рабочий Цикл (%) | 100% |
Вес, г | 1.814 |
Задать вопрос
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.