LM117K STEEL/NOPB, Линейный стабилизатор напряжения, положительный регулируемый, 40В основной вход, 1.2В до 25В/1.5A/1
The LM117K STEEL/NOPB is a 3-terminal Adjustable Regulator capable of supplying in excess of 1.5A over a 1.25V to 37V output range and a wide temperature range. This regulator is exceptionally easy to use and require only two external resistors to set the output voltage. The LM117 offer full overload protection such as current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal is disconnected. Typically, no capacitors are needed unless the device is situated more than 6 inches from the input filter capacitors, in which case an input bypass is needed. An optional output capacitor can be added to improve transient response. Because the regulator detects only the input-to-output differential voltage, supplies of several hundred volts can be regulated as long as the maximum input-to-output differential is not exceeded.
• 0.1% Typical load regulation
• 0.01%/V Typical line regulation
• 1.5A Output current
• Current limit constant with temperature
• 80dB Ripple rejection
• Short-circuit protected output
• Non-ceramic output capacitor
• Green product and no Sb/Br
Полупроводники - Микросхемы\Микросхемы Управления Питанием\Стабилизаторы Напряжения
Технические параметры
Тип выхода | регулируемый |
Выходной Ток | 1.5А |
Минимальная Рабочая Температура | -55 C |
Максимальная Рабочая Температура | 125 C |
Количество Выводов | 3вывод(-ов) |
Минимальное Входное Напряжение | 4.2В |
Максимальное Входное Напряжение | 40В |
Минимальное Регулируемое Выходное Напряжение | 1.2В |
Максимальное Регулируемое Выходное Напряжение | 25В |
Стиль Корпуса Линейного Стабилизатора | to-3 |
Вес, г | 28.12 |
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.