LM5021MM-1/NOPB, ШИМ контроллер токового режима, 30В-8В питание, 500кГц, 600мВ/100мА выход, MSOP-8
The LM5021MM-1/NOPB is an off-line Pulse Width Modulation (PWM) Controller contains all of the features needed to implement highly efficient off-line single-ended flyback and forward power converters using current-mode control. It features include an ultra-low (25µA) start-up current, which minimizes power losses in the high voltage start-up network. A skip cycle mode reduces power consumption with light loads for energy conserving applications (ENERGY STAR®, CECP and so forth). Additional features include under-voltage lockout, cycle-by-cycle current limit, hiccup mode overload protection, slope compensation, soft-start and oscillator synchronization capability. This high performance 8-pin IC has total propagation delays less than 100ns and a 1MHz capable oscillator that is programmed with a single resistor.
• Current mode control
• Skip cycle mode for low standby power
• Single resistor programmable oscillator
• Synchronizable oscillator
• Adjustable soft-start
• Direct opto-coupler interface
• Under voltage lockout (UVLO) with hysteresis
• Cycle-by-cycle over-current protection
• Hiccup mode for continuous overload protection
• Leading edge blanking of current sense signal
• Green product and no Sb/Br
Полупроводники - Микросхемы\Микросхемы Управления Питанием\ШИМ Контроллеры
Технические параметры
Выходной Ток | 100мА |
Выходное Напряжение | 600мВ |
Минимальная Рабочая Температура | -40 C |
Максимальная Рабочая Температура | 125 C |
Частота | 500кГц |
Максимальное Напряжение Питания | 30В |
Минимальное Напряжение Питания | 8В |
Количество Выводов | 8вывод(-ов) |
Входное Напряжение | 15В |
Стиль Корпуса ИС Контроллера | MSOP |
Вес, г | 0.104 |
Задать вопрос
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.