MAX5982CETE+, POE контроллер, IEEE 802.3af/at, 60В вход, 70Вт выход, 36В блокировка по недостаточному напряжению
The MAX5982CETE+ from Maxim Integrated Products is an IEEE 802.3af/at-compliant, powered device interface controller with integrated 70W high-power MOSFET in 16 pin TDFN package. It provides a complete interface for a powered device (PD) to comply with the IEEE® 802.3af/at standard in a power-over-Ethernet (PoE) system. It also provides PD with a detection signature, classification signature and an integrated isolation power switch with inrush current control. During the inrush period, The MAX5982C limit the current to less than 182mA before switching to the higher current limit (1700mA to 2100mA) when the isolation power MOSFET is fully enhanced. The device features an input UVLO with wide hysteresis and long deglitch time to compensate for twisted-pair cable resistive drop and to assure glitch-free transition during power-on/-off conditions. The MAX5982C can withstand up to 100V at the input.
• Two event classification or an external wall adapter indicator output
• Simplified wall adapter interface
• Provides power good signal, 2 step current limit/foldback, overtemperature protection, di/dt limit
• 100Vinput absolute maximum rating
• Inrush current limit of 182mA maximum
• Legacy UVLO at 36V
• Operating temperature range from -40°C to 85°C
Полупроводники - Микросхемы\Микросхемы Управления Питанием\Power-over-Ethernet (POE) Контроллеры
Технические параметры
Минимальная Рабочая Температура | -40 C |
Максимальная Рабочая Температура | 85 C |
Количество Выводов | 16вывод(-ов) |
Входное Напряжение | 60В |
Стиль Корпуса ИС Контроллера | TDFN |
Блокировка Питания при Пониженном Напряжении | 36В |
Вес, г | 0.2 |
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.