DRV8832DGQR, Привод двигателя, полумостовой, 2.75В до 6.8В питание, 1А/2 выхода, MSOP-10
The DRV8832DGQR is a low voltage brushed DC Motor Driver with VOLTAGE REGULATION (IN1/IN2 Ctrl). It is suitable for battery-powered toys, printers and other low-voltage or battery-powered motion control applications. The device has one H-bridge driver and can drive one DC motor or one winding of a stepper motor, as well as other loads like solenoids. The output driver block consists of N-channel and P-channel power MOSFETs configured as an H-bridge to drive the motor winding. Provided with sufficient PCB heat sinking, it can supply up to 1A of DC/RMS or peak output current. The device operates on power supply voltages from 2.75 to 6.8V. To maintain constant motor speed over varying battery voltages while maintaining long battery life, a PWM voltage regulation method is provided. An input pin allows programming of the regulated voltage. A built-in voltage reference output is also provided.
• Efficient PWM voltage control for constant motor speed with varying supply voltages
• Overcurrent and short-circuit protection
• Under-voltage lockout and over-temperature protection
• Reference voltage output
• Current limit circuit
• Fault output
• 450mR (HS + LS) Low MOSFET on-resistance
• 300nA Typical sleep mode current
• Green product and no Sb/Br
Полупроводники - Микросхемы\Микросхемы Управления Питанием\Драйверы и Контроллеры
Технические параметры
Выходной Ток | 1а |
Минимальная Рабочая Температура | -40 C |
Максимальная Рабочая Температура | 85 C |
Максимальное Напряжение Питания | 6.8В |
Минимальное Напряжение Питания | 2.75В |
Количество Выводов | 10вывод(-ов) |
Количество Выходов | 2выход(-ов) |
Стиль Корпуса Привода | MSOP |
Тип Мотора | Мостовая Схема Управления |
Вес, г | 0.025 |
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.