DRV8806PWP, Контроллер/привод двигателя, шаговый, 8.2В до 40В питание, 2А/4 выхода, HTSSOP-16
The DRV8806PWP is a 4-channel Low-side Driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids or other loads. It can supply up to 2A (single channel on) or 1A (all channels on) continuous output current (with adequate PCB heat sinking at 25°C). A serial interface is provided to control the output drivers. Fault status can be read through the serial interface. Multiple DRV8806 device can be chained together to use a single serial interface. Internal shutdown functions are provided for overcurrent protection, short-circuit protection, under-voltage lockout and over-temperature and faults are indicated by a fault output pin.
• Four NMOS FETs with overcurrent protection
• Integrated inductive clamp diodes
• Serial interface
• Open/shorted load detection
• 2A RMS output current
• Green product and no Sb/Br
Полупроводники - Микросхемы\Микросхемы Управления Питанием\Драйверы и Контроллеры
Технические параметры
Выходной Ток | 2А |
Минимальная Рабочая Температура | -40 C |
Максимальная Рабочая Температура | 150 C |
Максимальное Напряжение Питания | 40В |
Минимальное Напряжение Питания | 8.2В |
Количество Выводов | 16вывод(-ов) |
Количество Выходов | 4выход(-ов) |
Стиль Корпуса Привода | HTSSOP |
Тип Мотора | шаговый |
Вес, г | 0.635 |
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.