The MKL25Z128VLK4 is an ultra-low-power Microcontroller, adds a full-speed USB 2.0 On-the-Go (OTG) controller or a full-speed crystal-less USB 2.0 device controller in addition to the Kinetis KL1x series. The Kinetis KL2x microcontroller family is compatible with Kinetis K20 MCUs (based on ARM® Cortex®-M4) and with all other Kinetis KL1x, KL2x, KL3x and KL4x series microcontrollers, providing a migration path to lower and higher performance and feature integration.
• Ultra-low-power Consumption
• Next-generation 32-bit ARM Cortex-M0+ Core — 2x More CoreMark/mA than Closest 8/16-bit Architecture
• Single-cycle fast I/O access port facilitates bit banging and software protocol emulation
• Compute Clocking option reduces dynamic power by placing peripherals in an Asynchronous stop mode
• LPUART, SPI, I?C, FlexIO, ADC, DAC, LP timer & DMA support LP mode operation without waking up core
• Up to 256kb Flash with 64-byte Flash Cache, up to 32kb RAM
• Security Circuitry to Prevent Unauthorized Access to RAM and Flash Contents
• 16kb ROM and Built-in boot loader simplifies effort to program MCU and allows easy flash upgrades
• ARM Cortex-M0+ core, 48MHz Core Frequency Over Full Voltage and Temperature Range (-40 to +105°C)
• Bit Manipulation Engine for Improved Bit Handling of Peripheral Modules
• Thumb Instruction Set Combines High Code Density with 32-bit Performance
• 4-channel DMA for peripheral & memory servicing with reduced CPU loading & faster system throughput
• Independent-clocked COP Guards Against Clock Skew or Code Runaway for Fail-safe Applications
• Up to 16-bit ADC with Configurable Resolution, Sample Time and Conversion Speed/Power
• Integrated Temperature Sensor
• High-speed Comparator with Internal 6-bit DAC
• 12-bit DAC with DMA Support
• Two 6-channel and One 2-channel 16-bit Low-power Timer PWM Modules with DMA Support
• 2-channel 32-bit Periodic Interrupt Timer provide time base for RTOS task schedule or Trigger Source
• Low-power Timer Allows Operation in All Power Modes Except for VLLS0
Полупроводники — МикросхемыМикроконтроллеры — MCUСпециализированные Микроконтроллеры
Технические параметры
| Максимальное Напряжение Питания | 3.6В |
| Минимальное Напряжение Питания | 1.71В |
| Количество Выводов | 80вывод(-ов) |
| Количество I/O | 66I/O |
| Скорость ЦПУ | 48МГц |
| Стиль Корпуса Микроконтроллера | LQFP |
| Размер Ядра Микроконтроллера | 32бит |
| Размер Памяти | 128КБ |
| Тип Встроенного Интерфейса | i2c, spi, uart, usb |
| Размер Памяти RAM | 16КБ |
| Архитектура | ARM Cortex-M0+ |
| Приложения Микроконтроллера | USB Микроконтроллер |
| Линейка Продукции | Kinetis L Family KL2x Series Microcontrollers |
| Семейство Микроконтроллера | Kinetis L |
| Серия Микроконтроллера | KL2x |
| Вес, г | 2.504 |

