MAX14752EUE+T, Analog Multiplexer, 8:1, 1 Circuit, 130 ohm, 20V to 72V, 10V to 36V, TSSOP-16
The MAX14752EUE+T is an 8 to 1 high voltage analogue multiplexer in 16 pin TSSOP package. It features 60 ohm typical on-resistance with 0.5ohm typical on-resistance matching between channels and 0.03ohm typical on-resistance flatness with dual supply. This low on-resistance multiplexer conducts equally well in either direction. Flexible logic levels for channel-select interface are defined by EN input. The device operates with dual supplies of ±10V to ±36V or a single supply of +20V to +72V. The MAX14752 is used in programmable logic controllers, environment control systems and ATE systems.
• Supply range accommodates wide voltage applications
• Wide ±36V (maximum) bipolar power supply and high +72V (maximum) single power supply
• Low leakage current and RON improves system accuracy
• 20nA low input maximum on-leakage current
• Low 25µA IDD supply current in disable mode saves power
• Break before make time delay of 10µs with dual supply
• Off isolation of 65dB and crosstalk of 62dB with dual supply
• Charge injection of 200pC with dual supply
• Easy to upgrade with pin compatible industry standard DG408 devices
• Operating temperature range from -40°C to 85°C
Полупроводники - Микросхемы\Коммутаторы, Мультиплексоры и Демультиплексоры\Аналоговые Мультиплексоры / Демультиплексоры
Технические параметры
Минимальная Рабочая Температура | -40 C |
Максимальная Рабочая Температура | 85 C |
Количество Выводов | 16вывод(-ов) |
Диапазон Напряжения Питания | 20В до 72В, 10В до 36В |
Макс. Сопротивление Включенного Состояния | 130Ом |
Количество Схем | 1схем(-а) |
Корпус Аналогового Мультиплексора | TSSOP |
Конфигурация Мультиплексора | 8:1 |
Вес, г | 0.07 |
Задать вопрос
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.