The CD74HCT573E is an octal CMOS Transparent D Latch with 3-state outputs. When the LE input is high, the Q outputs follow the data (D) inputs. When LE is low, the Q outputs are latched at the logic levels of the D inputs. A buffered OE input can be used to place the eight outputs in either a normal logic state (high or low) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components. OE does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver.
• Balanced propagation delays and transition times
• Standard outputs drive up to 10 LS-TTL loads
• Significant power reduction compared to LS-TTL logic ICs
• Inputs are TTL-voltage compatible
Полупроводники — МикросхемыЛогикаТриггеры-защелки
Технические параметры
| Выходной Ток | 6мА |
| Минимальная Рабочая Температура | -55 C |
| Максимальная Рабочая Температура | 125 C |
| Максимальное Напряжение Питания | 5.5В |
| Минимальное Напряжение Питания | 4.5В |
| Количество Выводов | 20вывод(-ов) |
| Тип Выхода Микросхемы | С Тремя Состояниями Неинвертирующий |
| Количество Бит | 8бит |
| Задержка Распространения | 35нс |
| Стиль Корпуса Микросхемы Логики | dip |
| Тип Защелки | Прозрачная D Типа |
| Базовый Номер / Семейство Логики | 74HCT573 |
| Базовый Номер Микросхемы Логики | 74573 |
| Семейство Логической Микросхемы | 74HCT |
| Максимальная рабочая температура | +125 C |
| Длина | 24.33мм |
| Минимальное рабочее напряжение питания | 4,5 В |
| Производитель | Texas Instruments |
| Полярность | Неинвертирующий |
| Тип корпуса | PDIP |
| Фиксирующий элемент | Тип D |
| Тип монтажа | Монтаж на плату в отверстия |
| Минимальная рабочая температура | -55 C |
| Ширина | 6.35мм |
| Режим фиксации | Прозрачный |
| Семейство логических элементов | HCT |
| Высота | 4.57мм |
| Тип выхода | С тремя состояниями |
| Максимальное рабочее напряжение питания | 5.5 V |
| Число контактов | 20 |
| Размеры | 24.33 x 6.35 x 4.57мм |
| Количество бит | 8бит |
| Вес, г | 15.88 |


