MC74HC373ADTG, Защелка, семейство HC, 74HC373, Прозрачная, С Тремя Состояниями Неинвертирующий, 21 нс, 7.8 мА
The MC74HC373ADTG is an octal 3-state non-inverting Transparent Latch identical in pinout to the LS373. The device inputs are compatible with standard CMOS outputs, with pull-up resistors, they are compatible with LSTTL outputs. It appears transparent to data (i.e., the outputs change asynchronously) when Latch Enable is high. When Latch Enable goes low, data meeting the setup and hold time becomes latched. The Output Enable input does not affect the state of the latches, but when Output Enable is high, all device outputs are forced to the high-impedance state. Thus, data may be latched even when the outputs are not enabled. The HC373A is identical in function to the HC573A which has the data inputs on the opposite side of the package from the outputs to facilitate PC board layout. The HC373A is the non-inverting version of the HC533A.
• High noise immunity characteristic of CMOS devices
• In compliance with the JEDEC standard no. 7.0A requirements
• Outputs directly interface to CMOS, NMOS and TTL
• 15 LSTTL Load output drive capability
• 1µA Low input current
Полупроводники - Микросхемы\Логика\Триггеры-защелки
Технические параметры
Выходной Ток | 7.8мА |
Минимальная Рабочая Температура | -55 C |
Максимальная Рабочая Температура | 125 C |
Максимальное Напряжение Питания | 6В |
Минимальное Напряжение Питания | 2В |
Количество Выводов | 20вывод(-ов) |
Тип Выхода Микросхемы | С Тремя Состояниями Неинвертирующий |
Количество Бит | 8бит |
Задержка Распространения | 21нс |
Стиль Корпуса Микросхемы Логики | TSSOP |
Тип Защелки | Прозрачная |
Базовый Номер / Семейство Логики | 74HC373 |
Базовый Номер Микросхемы Логики | 74373 |
Семейство Логической Микросхемы | 74HC |
Вес, г | 0.001 |
Задать вопрос
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.