SN74ACT574PW, Триггер, 74ACT574, D, 7 нс, 110 МГц, 24 мА, TSSOP

The SN74ACT574PW is an octal edge-triggered D-type Flip-flop with 3-state outputs. It is designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. On the positive transition of the clock input, the Q outputs are set to the logic levels set up at the data (D) inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines in a bus-organized system without need for interface or pull-up components. OE does not affect internal operations of the flip-flop.

• 9ns at 5V Maximum tpd
• Inputs are TTL-voltage compatible
• Green product and no Sb/Br

Полупроводники — МикросхемыЛогикаТриггеры

Технические параметры