SN74AVC16T245DGVR, No. of Inputs:16
The SN74AVC16T245DGVR is a 16-bit dual-supply Bus Transceiver with configurable voltage-level shifting and 3-state outputs. It uses two separate configurable power-supply rails. It is optimized to operate with VCCA/VCCB set at 1.4 to 3.6V. The device is operational with VCCA/VCCB as low as 1.2V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 to 3.6V. It is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The OE input can be used to disable the outputs so the buses effectively are isolated. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
• Overvoltage-tolerant inputs and outputs allow mixed-voltage-mode data communications
• Fully configurable dual-rail design
• Ioff Supports partial-power-down mode operation
• I/Os are 4.6V tolerant
• Latch-up performance exceeds 100mA per JESD 78, Class II
• Green product and no Sb/Br
Полупроводники - Микросхемы\Логика\Схемы Сдвига Уровня
Технические параметры
Выходной Ток | 12мА |
Минимальная Рабочая Температура | -40 C |
Максимальная Рабочая Температура | 85 C |
Максимальное Напряжение Питания | 3.6В |
Минимальное Напряжение Питания | 1.2В |
Количество Выводов | 48вывод(-ов) |
Количество Входов | 16 |
Задержка Распространения | 2.7нс |
Стиль Корпуса Микросхемы Логики | TVSOP |
Тип Логики | Bus Transceiver |
Вес, г | 0.403 |
Задать вопрос
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.