SN74LS299N, Регистр сдвига, 74LS299, Универсальный, 1 Элемент, 8 бит, DIP, 20 вывод(-ов)
The SN74LS299N is an universal Shift/Storage Register features multiplexed inputs/outputs to achieve full eight-bit data handling in a single 20-pin package. Two function-select inputs and two output-control inputs can be used to choose the modes of operation listed in the function table. Synchronous parallel loading is accomplished by taking both function-select lines, S0 and S1, high. This places the three-state outputs in a high-impedance state, which permits data that is applied on the input/output lines to be clocked into the register. Reading out of the register can be accomplished while the outputs are enabled in any mode. A direct overriding input is provided to clear the register whether the outputs are enabled or off.
• Multiplexed inputs/outputs provide improved bit density
• Hold (Store) operating mode
• Shift left operating mode
• Shift right operating mode
• Load data operating mode
• Operates with outputs enabled or at high Z
• 3-state Outputs drive bus lines directly
• Can be cascaded for N-bit word lengths
Полупроводники - Микросхемы\Логика\Сдвигающие Регистры
Технические параметры
Количество элементов | 1 Элемент |
Минимальная Рабочая Температура | 0 C |
Максимальная Рабочая Температура | 70 C |
Максимальное Напряжение Питания | 5.25В |
Минимальное Напряжение Питания | 4.75В |
Количество Выводов | 20вывод(-ов) |
Тип Выхода Микросхемы | С Тремя Состояниями |
Стиль Корпуса Микросхемы Логики | dip |
Функция Сдвига Регистра | универсальный |
Базовый Номер / Семейство Логики | 74LS299 |
Базовый Номер Микросхемы Логики | 74299 |
Семейство Логической Микросхемы | 74LS |
Количество Бит на Элемент | 8бит |
Вес, г | 3.326 |
Задать вопрос
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.