NPIC6C595PW,118, Регистр сдвига, Последовательный в Параллельный, Последовательный в Последовательный, 1 Элемент
The NPIC6C595PW is a 8-bit serial-in/serial or parallel-out Shift Register with a storage register and open-drain outputs. Both the shift and storage register have separate clocks. The device features a serial input (DS) and a serial output (Q7S) to enable cascading and an asynchronous reset input (MR\). A low on MR\ resets both the shift register and storage register. Data is shifted on the low-to-high transitions of the SHCP input. The data in the shift register is transferred to the storage register on a low-to-high transition of the STCP input and to the Q7S output on a low-to-high transition of the SHCP input. If both clocks are connected together, the shift register is always one clock pulse ahead of the storage register. Data in the storage register drives the gate of the output extended-drain NMOS transistor whenever the OE\ is low. A high on OE\ causes the outputs to assume a high-impedance OFF-state.
• Low power consumption
• All registers cleared with single input
• Eight power EDNMOS transistor outputs of 100mA continuous current
• 250mA Current limit capability
• 33V Output clamping voltage
• 30mJ Avalanche energy capability
Полупроводники - Микросхемы\Логика\Сдвигающие Регистры
Технические параметры
Количество элементов | 1 Элемент |
Минимальная Рабочая Температура | -40 C |
Максимальная Рабочая Температура | 125 C |
Максимальное Напряжение Питания | 5.5В |
Минимальное Напряжение Питания | 4.5В |
Количество Выводов | 16вывод(-ов) |
Тип Выхода Микросхемы | Открытый Сток |
Стиль Корпуса Микросхемы Логики | TSSOP |
Семейство Логической Микросхемы | NPIC |
Количество Бит на Элемент | 8бит |
Вес, г | 10 |
Задать вопрос
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.