DSPIC33FJ64GS606-I/PT, Контроллер Цифровых Сигналов, Серия dsPIC33F, 40 МГц, 64 КБ, 58 I/O, ECAN, I2C, SPI, UART, 2.75 В

The DSPIC33FJ64GS606-I/PT is a 16-bit Digital Signal Controller with high-speed PWM, ADC and comparators. The PGECx and PGEDx pins are used for In-circuit Serial Programming™ (ICSP™) and debugging purposes. It is recommended to keep the trace length between the ICSP connector and the ICSP pins on the device as short as possible. The CPU module has a 16-bit (data) modified Harvard architecture with an enhanced instruction set, including significant support for DSP. The CPU has a 24-bit instruction word with a variable length opcode field. The Program Counter (PC) is 23-bit wide and addresses up to 4M x 24 bits of user program memory space.

• Two 40-bit wide accumulators
• Single-cycle (MAC/MPY) with dual data fetch
• Single-cycle mixed-sign MUL plus hardware divide
• ±1% Internal oscillator
• Programmable PLLs and oscillator clock sources
• Low-power management modes (sleep, idle, doze)
• High-speed PWM — Up to 9PWM pairs with independent timing
• High-speed ADC module — Dedicated result buffer for each analogue channel
• Timers/output compare/input capture — Four input capture (IC) modules
• Communication interfaces — Two UART modules (12.5Mbps)
• 4-channel DMA with user-selectable priority arbitration
• Input/output — Selectable open-drain and pull-ups
• Debugger development support — In-circuit and in-application programming

Полупроводники — МикросхемыКотроллеры Цифровой Обработки Сигналов

Технические параметры