The ADN4661BRZ is a CMOS LVDS low voltage high speed differential signalling Line Driver offering data rates of over 600Mbps (300MHz) and ultra-low power consumption. It features a flow-through pin-out for easy PCB layout and separation of input and output signals. The device accepts low voltage TTL/CMOS logic signals and converts them to a differential current output of typically ±3.1mA for driving a transmission medium such as a twisted-pair cable. The transmitted signal develops a differential voltage of typically ±355mV across a termination resistor at the receiving end and this is converted back to a TTL/CMOS logic level by a line receiver. The ADN4661 and a companion LVDS receiver offer a new solution to high speed point-to-point data transmission and a low power alternative to emitter-coupled logic (ECL) or positive emitter-coupled logic (PECL).
• Flow-through pin-out simplifies PCB layout
• 300ps Typical differential skew
• 700ps Maximum differential skew
• 1.5ns Maximum propagation delay
• 23mW Typical low power dissipation
• Interoperable with existing 5V LVDS receivers
Технические параметры
| Тип | LVDS Драйвер |
| Количество драйверов / приемников | 1/0 |
| Скорость передачи данных | 600 mbps |
| Напряжение питания, В | 3…3.6 |
| Рабочая температура,C | -40…+85 |
| Корпус | soic-8(0.154 inch) |
| Вес, г | 0.15 |


