ATtiny85V-10SU, Микроконтроллер 8-Бит, AVR, 10МГц, 8КБ Flash, 6 I/O, [SO-8]
The ATTINY85V-10SU is a 8-bit high-performance low-power AVR RISC-based Microcontroller combines 8kB ISP flash memory, 512B EEPROM, 512B SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and external Interrupts, 4-channel 10-bit A/D converter, programmable watchdog timer with internal oscillator, three software selectable power saving modes and debugWIRE for on-chip debugging. The device achieves a throughput of 20 MIPS at 20MHz and operates between 2.7 to 5.5V. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
• Advanced RISC architecture - 120 powerful instructions, most single clock cycle execution
• Non-volatile program and data memories
• Peripheral features - On-chip analogue comparator
• debugWIRE on-chip debug system
• In-System Programmable via SPI port
• External and internal interrupt sources
• Low power idle, ADC noise reduction and power-down modes
• Enhanced power-on reset circuit
• Programmable brown-out detection circuit
• Internal calibrated oscillator
Технические параметры
Серия | avr attiny |
Ядро | avr |
Ширина шины данных | 8-бит |
Тактовая частота | 10 мгц |
Количество входов/выходов | 6 |
Объем памяти программ | 8 кбайт(4k x 16) |
Тип памяти программ | flash |
Объем EEPROM | 512x8 |
Объем RAM | 512x8 |
Наличие АЦП/ЦАП | ацп 4x10b |
Встроенные интерфейсы | usi |
Встроенная периферия | brown-outdetect/reset, por, pwm, wdt |
Напряжение питания | 1.8…5.5 в |
Рабочая температура | -40…+85c |
Корпус | soic-8(0.209, 5.30мм) |
Вес, г | 0.25 |
Задать вопрос
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.