The SN74LS373N is an octal D-type Transparent Latch with 3-state outputs. Designed specifically for driving highly capacitive or relatively low-impedance loads. The high-impedance 3-state and increased high-logic-level drive provide these registers with the capability of being connected directly to and driving the bus lines in a bus-organized system without need for interface or pull up components. This device is particularly attractive for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. The eight latches of the LS373 is transparent D-type latches, meaning that while the enable (C or CLK) input is high, the Q-outputs follow the data (D)-inputs. When C or CLK is taken low, the output is latched at the level of the data that was set up.
• 3-state Bus-driving outputs
• Full parallel access for loading
• Buffered control inputs
• Clock-enable input has hysteresis to improve noise rejection
• PNP inputs reduce DC loading on data lines
Технические параметры
| Серия | 74LS |
| Фиксирующий элемент | прозрачная защелка d-типа |
| Схема | 8:8 |
| Тип выхода | С Тремя Состояниями |
| Напряжение питания, В | 4.75…5.25 |
| Кол-во каналов | 1 |
| Время задержки, нс | 12 |
| Максимальный выходной ток: High/Low, мА | -2.6/24 |
| Рабочая температура, C | 0…+70 |
| Корпус | dip-20(7.62мм) |
| Вес, г | 2.5 |


