SN74HCT573DW, Регистр неинвертирующий 8-бит + шинный интерфейс [SOIC-20]
The SN74HCT573DW is an octal transparent D Latch with 3-state outputs. It is designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. While the latch-enable input is high, the Q outputs respond to the data inputs. When LE is low, the outputs are latched to retain the data that was set up at the D inputs. A buffered OE input can be used to place the eight outputs in either a normal logic state or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components. OE\ does not affect the internal operations of the latches.
• High-current 3-state outputs drive bus lines directly or up to 15 LSTTL loads
• 80µA Maximum low power consumption
• 21ns Typical tpd
• ±6mA Output drive at 5V
• 1µA Maximum low input current
• Inputs are TTL-voltage compatible
• Bus-structured pinout
• Green product and no Sb/Br
Технические параметры
Серия | 74HCT |
Фиксирующий элемент | прозрачная защелка d-типа |
Схема | 8:8 |
Тип выхода | С Тремя Состояниями |
Напряжение питания, В | 4.5…5.5 |
Кол-во каналов | 1 |
Время задержки, нс | 25 |
Максимальный выходной ток: High/Low, мА | -6/6 |
Рабочая температура, C | -40…+85 |
Корпус | soic-20(7.5мм) |
Вес, г | 0.9 |
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.