SN74LVC125APWR, Буфер / драйвер линии, неинвертирующий, 3 состояния, 4 элемента, 1 вход, 1.65В до 3.6 [TSSOP-14]
The SN74LVC125APWR is a quadruple Bus Buffer Gate designed for 1.65 to 3.6V VCC operation. The SN74LVC125A device feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is high. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver. Inputs can be driven from either 3.3 or 5V devices. This feature allows the use of this device as a translator in a mixed 3.3/5V system environment. It is suitable for cable modem termination systems, point-to-point microwave backhaul, private branch exchanges (PBX), vector signal analyzers and generators.
• Separate OE for all 4 buffers
• Inputs accept voltage to 5.5V
• Maximum tpd of 4.8ns at 3.3V
• Latch-up performance exceeds 250mA per JESD 17
• ±50mA Continuous output current
• ±100mA Continuous current through VCC or GND
Технические параметры
Серия | 74LVC |
Технология | cmos |
Тип | buffer/line driver |
Полярность | неинвертирующий |
Число элементов | 4 |
Количество Бит на Элемент | 1 |
Тип выхода | push-pull(3-state) |
Выходной ток высокого уровня, IOH (мА) | -24 |
Выходной ток низкого уровня, IOL (мА) | 24 |
Напряжение питания, В | 1.65…3.6 |
Рабочая температура,C | -40…+125 |
Корпус | tssop-14(0.173 inch) |
Вес, г | 0.12 |
Дополнительная вкладка, для размещения информации о магазине, доставке или любого другого важного контента. Поможет вам ответить на интересующие покупателя вопросы и развеять его сомнения в покупке. Используйте её по своему усмотрению.
Вы можете убрать её или вернуть обратно, изменив одну галочку в настройках компонента. Очень удобно.