MAX3394EEBL+T, Транслятор уровня, двунаправленный, 2 входа, 1.2В до 5.5В питание, 50нс задержка, UCSP-9

The MAX3394EEBL+T from Maxim Integrated Products is a ±15kV ESD protected, high drive current, dual level translator with speed-up circuitry in 9 pin UCSP package. The bidirectional level translator provides level shifting required for data transfer in a multivoltage system. This device has an internal slew-rate enhancement circuitry featuring 10mA current-sink and 15mA current-source drivers to isolate capacitive loads from lower current drivers. In open-drain systems, slew rate enhancement enables fast data rates with larger pull-up resistors and increased bus load capacitance. The level translator operates in tri-state output mode with thermal-shutdown protection and ±15kV Human Body Model (HBM) ESD protection on the VCC side for greater protection. It is ideally used for data transfer between low voltage ASIC/PLDs and higher voltage systems.

• Operation down to +1.2V on VL and +1.65V on VCC, (1.2 to Vcc) VL and (1.65 to 5.5V) VCC supply
• Operating temperature range from -40°C to 85°C, 2 number of translators
• Bidirectional level translation without direction pin
• Slew-rate enhancement circuitry supports, larger capacitive loads/larger external pull-up resistors
• Low supply current in tri-state output mode (3µA typ)
• Thermal shutdown protection
• Data rate of 6Mbps with push-pull driver and 1Mbps with open-drain driver
• High-impedance state of the I/O lines during tri-state output mode
• Cell Phones, High-Speed Bus Fan-Out Expansion, Multivoltage Bidirectional Level Translation, Open-Drain Rise-Time Speed Up, SPI™,
• MICROWIRE™, and I?C Level Translation, Telecom, Networking, Server, RAID/SAN

Полупроводники — МикросхемыЛогикаСхемы Сдвига Уровня

Технические параметры