The AFE4404YZPT is an Analog Front-End for optical bio-sensing applications, such as heart-rate monitoring (HRM) and saturation of peripheral capillary oxygen (SpO2). The device supports three switching light-emitting diodes (LEDs) and a single photodiode. The current from the photodiode is converted into voltage by the transimpedance amplifier (TIA) and digitized using an analog-to-digital converter (ADC). The ADC code can be read out using an I?C interface. The AFE also has a fully integrated LED driver with a 6-bit current control. The device has a high dynamic range transmit and receive circuitry that helps with the sensing of very small signal levels.
• Transmitter — supports common anode LED configuration
• Transmitter — 100dB dynamic range
• Transmitter — 6-bit programmable LED current to 50mA (Extendable to 100 mA)
• Transmitter — Programmable LED on-time
• Transmitter — Simultaneous Support of 3 LEDs for Optimized SpO2, HRM or multi-wavelength HRM
• 24-bit Representation of the current input from a photodiode in twos complement format
• Receiver — Individual DC offset subtraction DAC at TIA input for each LED and ambient phase
• Receiver — Digital ambient subtraction at ADC output
• Receiver — 10 kR to 2 MR Programmable transimpedance gain
• Receiver — 100dB Dynamic range
• Receiver — Dynamic power-saving mode to reduce current to less than 200µA
• 10 to 1000SPS Pulse frequency
• Flexible pulse sequencing and timing control
• Flexible clock options — External 4 to 60MHz Input Clock, Internal 4MHz Oscillator
Полупроводники — МикросхемыСпециальные Функции
Технические параметры
| Минимальная Рабочая Температура | -20 C |
| Максимальная Рабочая Температура | 70 C |
| Максимальное Напряжение Питания | 5.25В |
| Минимальное Напряжение Питания | 3В |
| Количество Выводов | 15вывод(-ов) |
| Тип Корпуса ИС | DSBGA |
| Функция Микросхемы | Аналоговое Устройство Front End |
| Максимальная рабочая температура | +70 C |
| Количество каналов на ИС | 1 |
| Длина | 2.6мм |
| Минимальное рабочее напряжение питания | 1,7 В (цифровой), 2 В |
| Производитель | Texas Instruments |
| Тип источника питания | Одинарный |
| Частота дискретизации | 1000ходов/с |
| Тип корпуса | DSBGA |
| Тип монтажа | Surface Mount |
| Минимальная рабочая температура | -20 C |
| Ширина | 1.6мм |
| Разрешение | 24 bit |
| Высота | 0.31мм |
| Максимальное рабочее напряжение питания | 3,6 В (аналоговый) |
| Число контактов | 15 |
| Размеры | 2.6 x 1.6 x 0.31мм |
| Тип интерфейса | Последовательный, I2C |
| Применение | Расход калорий, Вариабельность частоты сердечных сокращений, Оптический мониторинг сердечного ритма, Пульсовая оксиметрия, Макс. VO2 |
| Количество АЦП | 1 |
| Вес, г | 0.1 |



