MM74HC175M, Триггер, со сбросом, дополнительный выход, положительный фронт, 74HC175, D, 13 нс, 60 МГц, 5.2 мА

The MM74HC175M is a quad D-type Flip-flop with clear and with complementary outputs. It utilizes advanced silicon-gate CMOS technology to achieve the high noise immunity and low power consumption of standard CMOS integrated circuits, along with the ability to drive 10 LS-TTL loads. Information at the D inputs of the MM74HC175 is transferred to the Q and Q outputs on the positive going edge of the clock pulse. Both true and complement outputs from each flip flop are externally available. All four flip-flops are controlled by a common clock and a common clear. Clearing is accomplished by a negative pulse at the clear input. All four Q outputs are cleared to a logical ‘0’ and all four Q outputs to a logical ‘1’. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.

• 1µA Maximum low input current
• 80µA Maximum low quiescent current
• 4mA Minimum high output drive current

Полупроводники — МикросхемыЛогикаТриггеры

Технические параметры