The ATTINY13A-PU is a picoPower 8-bit AVR RISC-based Microcontroller features 64-byte EEPROM, 32-byte register file and 4-channel 10-bit A/D converter. The device achieves up to 20 MIPS throughput at 20MHz at 1.8 to 5.5V operation. By executing powerful instructions in a single clock cycle, the microcontroller achieves throughputs approaching 1 MIPS per MHz allowing you to optimize power consumption versus processing speed.
• High-performance, Low-power AVR® 8-Bit Microcontroller
• Advanced RISC Architecture
• High Endurance Non-volatile Memory Segments
• debugWIRE On-chip Debug System
• In-system Programmable via SPI Port
• External and Internal Interrupt Sources
• Low-power Idle, ADC Noise Reduction and Power-down Modes
• Enhanced Power-on Reset Circuit
• Programmable Brown-out Detection Circuit with Software Disable Function
• Internal Calibrated Oscillator
• 0 to 20MHz at 4.5 to 5.5V Speed Grade
• Supplier’s original packaging: Tube
Технические параметры
| Серия | avr attiny |
| Ядро | avr |
| Ширина шины данных | 8-бит |
| Тактовая частота | 20 мгц |
| Количество входов/выходов | 6 |
| Объем памяти программ | 1 кбайт(512×16) |
| Тип памяти программ | flash |
| Объем EEPROM | 64×8 |
| Объем RAM | 64×8 |
| Наличие АЦП/ЦАП | ацп 4x10b |
| Встроенная периферия | brown-outdetect/reset, por, pwm, wdt |
| Напряжение питания | 1.8…5.5 в |
| Рабочая температура | -40…+85c |
| Корпус | dip-8(0.300, 7.62мм) |
| Вес, г | 1 |

